Rather have a pro do it for you?
| Tools and Supplies to Install a Natural Gas Pool Heater | ||||
|---|---|---|---|---|
| 1 | Pipe cutter | |||
| 2 | Adjustable wrench | |||
| 3 | Pipe wrench | |||
| 4 | Screwdriver set | |||
| 5 | Teflon tape | |||
| 6 | Gas leak detector | |||
| 7 | Pressure gauge | |||
| 8 | Pipe thread sealant | |||
| 9 | Flaring tool | |||
| 10 | Propane torch kit | |||
| 11 | Hacksaw | |||
| 12 | PVC pipe cutter | |||
| 13 | Channel lock pliers | |||
| 14 | Pipe reamer | |||
| 15 | Pipe bending tool | |||
How to Install a Natural Gas Pool Heater
Step-by-Step Guide: Installing Your Own Natural Gas Pool Heater
Installing a natural gas pool heater can be a great way to extend the swimming season and enjoy your pool for longer periods of time. Here are the steps to follow for a successful installation:
Step 1: Choose the Right Location
The first step is to choose the right location for your heater. It should be located close to the gas supply line and electrical power source. It should also be away from any flammable materials and at least five feet away from the pool.
Step 2: Prepare the Area
Before you begin installation, you need to prepare the area. Clear the space where the heater will be installed and ensure that it is level. If necessary, pour a concrete pad for the heater to sit on.
Step 3: Install the Gas Line
Next, you need to install the gas line. This should be done by a licensed professional who is familiar with local codes and regulations. The gas line should be connected to the heater and tested for leaks.
Step 4: Connect the Electrical
Once the gas line is in place, you can connect the electrical. This should also be done by a licensed professional. The heater should be connected to a dedicated circuit that is protected by a ground fault circuit interrupter (GFCI).
Step 5: Mount the Heater
Now it's time to mount the heater. Follow the manufacturer's instructions for mounting the heater to the concrete pad. Be sure to use the correct hardware and ensure that the heater is level.
Step 6: Connect the Water Pipes
Once the heater is mounted, you can connect the water pipes. The inlet pipe should be connected to the pool's circulation system and the outlet pipe should be connected to the return line. Be sure to use the correct fittings and tighten them securely.
Step 7: Test the System
Before you start using your new pool heater, you need to test the system. Turn on the gas and electrical power and let the heater run for a few minutes. Check for any leaks in the gas line and ensure that the water is flowing properly.
Step 8: Enjoy Your Heated Pool
Once you've tested the system and everything is working properly, it's time to enjoy your heated pool. Set the temperature to your desired level and enjoy swimming in warm water even on cool days.
In conclusion, installing a natural gas pool heater can be a great investment for any pool owner. By following these steps and working with licensed professionals, you can ensure a safe and successful installation.
